5180-154-0003 Encoder 250 Pulse with 6m Cable for Spreader Machine Cutter Parts

The 5180-154-0003 Encoder 250 Pulse with 6m Cable is a replacement spare part designed for automatic spreader machines and cutter related equipment.

This encoder provides accurate position and movement feedback signals to the machine control system, helping maintain stable operation, precise positioning and reliable production performance.

It is suitable for garment factories, textile manufacturers, machine maintenance companies and spare parts distributors.

Please send your machine model, original part number and product photos before ordering. Our team will help confirm compatibility and provide a complete quotation.

The encoder is an important electronic component used in automatic spreading and cutting equipment.

During machine operation, the encoder converts mechanical movement into electrical pulse signals. These signals are transmitted to the machine controller to monitor position, speed and movement status.

The 5180-154-0003 Encoder 250 Pulse with 6m Cable is designed for compatible spreader machine applications. It helps the control system accurately recognize machine movement and maintain stable operating performance.

When the encoder becomes worn, damaged or loses signal accuracy, the machine may experience positioning errors, unstable movement, abnormal stopping or incorrect operation.

Replacing the damaged encoder with the correct cutter parts helps restore machine feedback accuracy, reduce downtime and maintain continuous production.

This product is widely used in garment production, textile processing, automatic spreading systems and industrial cutting machine maintenance.

The encoder works as a feedback sensor inside the automatic spreading machine system.

During operation, the rotating or moving mechanical parts drive the encoder. The encoder converts this movement into pulse signals and sends the information to the control system.

The machine controller uses these signals to calculate movement position and speed, allowing the equipment to perform accurate and stable operations.

A properly functioning encoder helps improve positioning accuracy, reduce movement errors and maintain consistent production quality.

• Accurate Signal Feedback

  The encoder provides stable pulse signals for machine position monitoring.

• 250 Pulse Resolution

  The 250 pulse specification supports accurate movement detection for compatible equipment.

• 6 Meter Cable Design

  The extended cable length allows flexible installation inside machine systems.

• Stable Industrial Performance

  Designed for continuous operation in garment and textile production environments.

• Easy Replacement

  The encoder can replace damaged or failed components without replacing the complete control system.

• Reliable Spare Part Solution

  Suitable for factories preparing maintenance inventory and emergency replacement parts.

• Improves Position Accuracy

  Accurate feedback helps the machine maintain correct movement positioning.

• Reduces Machine Errors

  Stable signal transmission helps reduce abnormal movement and operation interruptions.

• Supports Continuous Production

  Reliable encoder performance helps reduce unexpected downtime.

• Improves Maintenance Efficiency

  Keeping spare encoders available allows faster machine repair.

• Protects Production Stability

  Correct movement feedback helps maintain consistent spreading and cutting quality.

• Machine position becomes inaccurate.
• Movement direction becomes unstable.
• The machine stops unexpectedly.
• The controller receives abnormal feedback signals.
• The machine cannot complete automatic operation.
• The encoder cable is damaged or signal transmission is interrupted.
• The machine requires frequent adjustment.
• When these problems occur, the encoder and related electrical connections should be inspected.

• Replacement is recommended when:
• The machine position is inaccurate.
• The encoder signal becomes unstable.
• The machine stops randomly during operation.
• The cable is damaged.
• The connector becomes loose.
• The encoder produces abnormal noise.
• The machine controller shows movement feedback errors.
• Before replacement, check the power supply, wiring, connector and controller system to confirm the failure source.

• Please provide:
• Complete machine model
• Original part number
• Encoder label photo
• Installed encoder photos
• Cable and connector photos
• Required quantity
• Destination country
• Postal code
• Different machines may use different pulse specifications, cable lengths and connector types.
• Please confirm the complete model before ordering.

1. Turn off the machine power before replacement.
2. Disconnect the electrical connection.
3. Remove the old encoder carefully.
4. Check the mounting position and shaft connection.
5. Install the new encoder correctly.
6. Connect the cable securely.
7. Check the signal output.
8. Test machine movement before normal production.
9. Professional installation is recommended.

• Garment factories
• Textile production plants
• Automatic spreading machines
• Fabric cutting production lines
• Automotive interior material processing
• Furniture fabric processing
• Industrial textile equipment maintenance
• Cutter parts distribution

• Garment manufacturers
• Textile factories
• Automatic cutter maintenance departments
• Spreader machine repair companies
• Industrial machinery distributors
• Cutter parts importers
• Textile equipment service companies

• Professional Cutter Parts Supplier

  We supply automatic cutting machine spare parts, spreader parts and industrial equipment components.

• Compatibility Support

  Send your machine model and old part photos. Our team helps confirm the correct replacement part.

• Stable Product Inspection

  Each encoder is checked before shipment to ensure correct model and appearance.

• Flexible Ordering

  Small quantity trial orders and regular maintenance orders are supported.

• One Stop Spare Parts Supply

  We also supply:

  • Encoder
  • Motor
  • Sensor
  • Cable
  • Blade
  • Grinding Wheel
  • Bearing
  • Belt
  • Maintenance Kit
  • Other Cutter Parts
• Global Export Experience

  We support customers from Bangladesh, Indonesia, Brazil, Philippines, USA, Egypt and European countries.

Each encoder is packed carefully to protect the electronic components, cable and connector.

Export packing can be arranged according to order quantity.

Express delivery and air shipment are available.

Commercial invoice and packing list can be provided before shipment.

• Please send:
• Machine model
• Original part number
• Encoder photos
• Required quantity
• Destination country
• Shipping method
• After receiving your information, we will confirm compatibility and provide price, availability and delivery information.

• Is 5180-154-0003 suitable for all spreader machines

  No. Different machines may use different encoder specifications. Please provide your machine model and encoder photos before ordering.

• What is the function of this encoder

  It detects machine movement and sends pulse feedback signals to the control system.

• What does 250 Pulse mean

  It refers to the encoder pulse output specification used for movement detection.

• Can you supply other spreader parts

  Yes. We supply encoder, motor, sensor, belt, bearing and other spreader and cutter parts.

• Can you supply automatic cutter parts

  Yes. We supply a wide range of cutter parts for garment, textile and industrial cutting equipment.